Cognito 5-Inch Performance Lift Kit with Fox PSRR 2.0 Shocks for 20-25 Silverado/Sierra 2500/3500 2WD/4WD
Each Kit Features:
- Yields 5-inches of front lift, 3" Rear Lift
- SM Series Ball Joint Upper Control Arms
- Patented Pitman and Idler Arm Support Kit
- Fox 2.0 Performance Series Remote Reservoir Shocks
- Maintains Adequate Droop Travel for Superior Ride Quality
- 13-hour DIY install time
We have bundled everything you need in a lift kit for your Silverado/Sierra 2500/3500 2WD/4WD with high quality Cognito components. There is no guesswork. Cognito components are engineered and assembled in the USA, and nearly all Cognito components are manufactured in Bakersfield California.
The Cognito Non-Torsion Bar Drop Front Lift kit is designed and engineered to offer maximum ground clearance by keeping the torsion bars tucked up in the frame rather than being dropped down, while maintaining a superior ride quality, along with proper CV axle angles.
The Cognito SM Series Upper Control Arms add style, function and performance to your vehicle by correcting the Ball Joint angle and adding caster for lifted and leveled applications, and increasing the allowable droop travel for superior ride quality. The control arm kit features boxed sheet metal arms that are welded, and powder coated semi-gloss black with pre-installed maintenance free ball joints and pivot bushings. No assembly required, these are ready to install.
Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC vehicles for decades. When tie rod angles increase to anything above parallel to the center link, the life of pitman and idler arms decreases rapidly without this upgrade. The Cognito PISK (Pitman and Idler Arm Support Kit) prevents premature wear of pitman and idler arms by supporting and controlling the intended motion of these components in an innovative method which earned a Utility Patent. Say good bye to the need for a steering stabilizer which simply masks the root problem, this support kit is all that is needed to Fix the Flaw and control the GM pitman and idler arm style steering properly.
The Fox 2.0 Performance Series Remote Reservoir shocks contain the latest in shock technology in the 2" diameter shock lineup. They are rust resistant via a metal impact extruded aluminum body which also increases cooling capacity.
37x12.50 tire on stock 20” wheel
Will require a wheel spacer at least 1/4” thick. A 1.5” wheel spacer looks really good. Use tie back kit plus medium trimming.
35 on 10” wide wheel +18mm offset
Use tie back kit plus light trimming.
35 on 10” wide wheel, 0mm offset
Use tie back kit plus medium trimming.
37x12.50, 9” wide wheel +18mm offset
Use tie back kit plus light trimming.
37x12.50, 9” wide wheel, 0mm offset
Use tie back kit plus medium trimming.
37x12.50 on 10” wide wheel, +18mm offset
Use tie back kit plus medium trimming.
37x12.50 on 10” wide wheel, 0mm offset
Use tie back kit plus heavy trimming.
Lead Time | Quick Ship |
---|---|
Weight | 400.000000 |
Country of Origin | US |
-
Posted on
2024 gmc 3500 5 inch kit with fox shocks and upgraded steeringCognito is by far the best ride performance and quality lift for GM trucks. I have used them for years and have installed a lot of different brands of lifts. Cognito has the best ride and quality of them all.


Limited Lifetime Warranty
Applies to all Cognito branded products


Live Tech Support
Monday - Friday (8AM - 5PM)


Top Choice for Pro Builders
Industry-Leader for Over 20 Years


Proudly Made in the USA
Engineered and Manufactured in Southern California